Features:
1 and 0 had input voltage range
Had small volume, light weight, high efficiency
Characteristics: short circuit protection miscalculates/overload
Had air cooling
With that took on light emitting diode (led)
1 0, 0% had burned machine full load test
1 years had quality guarantee
vice size: 99 * 97 * 36 mm (L * W * H)
Technical parameter:
model |
MS-15-5 |
MS-15-12 |
MS-15-24 |
output |
Dc output voltage |
5V |
12V |
24V |
Output voltage tolerance |
±1% |
±1% |
±1% |
Rated output current |
3A |
1.3A |
0.7A |
Output current range |
0-3A |
0-1.3A |
0-0.7A |
Output power |
15W |
15.6W |
16.8W |
Ripple and the noise |
80mVp-p |
120mVp-p |
150mVp-p |
Dc voltage adjustable scope |
+10,-5% |
±10% |
±10% |
Start, rise, keep time |
200ms,50ms,20ms/230VAC |
input |
Input voltage range |
170~264VAC 47~63Hz,235~373VDC |
Exchange input current |
0.25A/230VAC |
efficiency |
76% |
76% |
80% |
Impulse current |
Cold start current |
30A/230VAC |
Leakage current |
<0.5mA/240VAC |
Protection characteristics |
Overload protection |
Protection way: fold layer type load current limiting, abnormal conditions can be removed recovery |
environment |
Working temperature, humidity |
-10℃~+60℃;20%~90%RH(Please refer to reduce the specified number load curve |
Keep temperature, humidity |
-20℃~+85℃;10%~95%RH No condensation |
Vibrate resistance |
10~500Hz,2G 10min./ 1 cycle time, 60 minutes, the axis |
security |
Compression sex |
Between the input and output, the output and input: with ground: |
100M Ohms/500VDC |
Insulation resistance |
Between the input and output, the output and input: with ground: |
100M Ohms/500VDC |
standard |
Safety standards |
Meet the UL1012 requirements |
EMC standard |
Meet the FCC PART15J equipment conditions B |
other |
weight |
0.15kg 84*58*38(L*W*H) |
packaging |
0.15kg/80pcs/13kg |
note |
1. All the parameters in has not specified, all is in 2 3 0 V voltage input, A C rated load and 2 5 ℃ conditions measuring income value. |
2. Ripple and noise voltage is in 2 0 M H z bandwidth with 1 to 2 inches oscilloscope twisted pair end and 0. 1 mu and 4 7 muon capacitance measurement when. |
3. Tolerance is voltage setting error, the voltage adjustment rate and adjust the sum total of the current rate. |
Installation dimensions:
|