Features:
Had 170 ~ 264 VAC input voltage range
Had small volume, light weight, high efficiency
Characteristics: short circuit protection miscalculates/overload
Had natural cooling
With that took on light emitting diode (led)
1 0, 0% had burned machine full load test
1 years had quality guarantee
Size: 84 x 58 x 38 mm
model |
MS-35-5 |
MS-35-12 |
MS-35-24 |
output |
Dc output voltage |
5V |
12V |
24V |
Output voltage tolerance |
±1% |
±1% |
±1% |
Rated output current |
5A |
3.0A |
1.5A |
Output current range |
0~5A |
0~3.0A |
0~1.5A |
Output power |
25W |
36W |
36W |
Ripple and the noise |
80mVp-p |
120mVp-p |
120mVp-p |
Dc voltage adjustable scope |
-9%~+10% |
±10% |
±10% |
Start, rise, keep time |
800ms,20ms,24ms/230VAC. |
input |
Input voltage range |
170~264VAC 47~63Hz,235~373VDC |
Exchange input current |
0.45A/230VAC |
efficiency |
76% |
78% |
80% |
Impulse current |
Cold start current 30A/230VAC |
Leakage current |
<1mA/240VAC |
Protection characteristics |
Overload protection |
Protection way: fold layer type load current limiting, abnormal conditions can be removed recovery |
environment |
Working temperature, humidity |
-10℃~+60℃;20%~90%RH(Please refer to reduce the specified number load curve ) |
Keep temperature, humidity |
-20℃~+85℃;10%~95%RH No condensation |
Vibrate resistance |
10~500Hz,2G 10min./ 1 cycle time, 60 minutes, the axis |
security |
Compression sex |
Input/output: 1.5 KVAC input and between to KVAC output and the earth: 1.5:0.5 KVAC |
Insulation resistance |
Between the input and output, the output and input: with ground: 100 M / 500 VDC Ohms |
Complies with the standards |
Safety standards |
Meet the UL1012 requirements |
EMC standard |
Accord with |
EN55022,CLASSA |
other |
weight |
0.17kg 84*58*38(L*W*H) |
packaging |
0.17kg/80pcs/14.5kg/0.9CUFT |
note |
1. All the parameters in has not specified, all is in 2 3 0 V voltage input, A C rated load and 2 5 ℃ conditions measuring income value. |
2. Ripple and noise voltage is in 2 0 M H z bandwidth with 1 to 2 inches oscilloscope twisted pair end and 0. 1 mu and 4 7 muon capacitance measurement when. |
3. Tolerance is voltage setting error, the voltage adjustment rate and adjust the sum total of the current rate. |
|