Features:
High efficiency, high reliability and low cost
Switch input voltage range choice
100% full load and machine test
Protection characteristics: short circuit/overload
Air cooling
Working frequency 37 KHz
One year warranty
Size: 129*98*38mm (L * W * H)
Technical parameter:
Model |
S-35-5 |
S-35-9 |
S-35-12 |
S-35-15 |
S-35-24 |
OUTPUT |
Dc output voltage |
5V |
9V |
12V |
15V |
24V |
Output voltage tolerance |
±2% |
±1% |
±1% |
±1% |
±1% |
Rated output current |
7A |
3.6A |
3A |
2.4A |
1.5A |
Output current range |
0-7A |
0-3.6A |
0-3A |
0-2.4A |
0-1.5A |
Output power |
35W |
32.4W |
36W |
36W |
36W |
Ripple and the noise |
75mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
Dc voltage adjustable scope |
+10,-5% |
±10% |
±10% |
±10% |
±10% |
Start, rise, keep time |
200ms,100ms,30ms Loaded with |
INPUT |
Input voltage range |
85~132 VAC/170~264VAC 47~63 Hz;选择 240~370VDC |
Exchange input current |
0.8 A/115 V 0.45A/ 230 V |
efficiency |
70% |
72% |
76% |
78% |
78% |
Impulse current |
冷启动电流18A/115V 36A/230V |
Leakage current |
<2mA/240VAC |
PROTECTION |
Overload protection |
110%~160% |
Protection way: current limiting, automatic recovery |
ENVIRONMENT |
Working temperature, humidity |
-10℃~+60℃;20%~90 %RH |
Keep temperature, humidity |
-20℃~+85℃;10%~95 %RH |
Vibrate resistance |
10~500Hz,2G 10min./1 cycle time, 60 minutes, the axis |
SAFETY |
Compression sex |
Between input and output |
:1.5KVAC Input and to |
:1.5KVAC Output and to |
:0.5KVAC |
Insulation resistance |
Between the input and output, the input and output, and the earth |
: 100M Ohms/500VDC |
STANDARD |
Safety standards |
Accord with |
UL1012 |
EMC standards |
Design refer to FCC Part15 J Conduction Class B |
OTHERS |
weight |
0.41Kg |
packaging |
45pcs/18.8Kg/1.22CUFT |
NOTE |
1. All the parameters in has not specified, all is in 230 VAC voltage input, rated load and 25 ℃ conditions measuring income value. |
2. Ripple and noise voltage is in 20 MHz bandwidth oscilloscope take 12 inches twisted pair end with 0.1 mu and 47 u when capacitance measurement. |
3. Tolerance is voltage setting error, the voltage adjustment rate and adjust the sum total of the current rate. |
4. Specific output current see output drop forehead curve. |
Installation dimensions:
|