model |
S-60-5 |
S-60-12 |
S-60-15 |
S-60-24 |
S-60-48 |
output |
Dc output voltage |
5V |
12V |
15V |
24V |
48V |
Output voltage tolerance |
±2% |
±1% |
±1% |
±1% |
±1% |
Rated output current |
12A |
5A |
4A |
2.5A |
1.3A |
Output current range |
0-12A |
0-5A |
0-4A |
0-2.5A |
0-1.3A |
Output power |
60W |
60W |
60W |
60W |
62.4W |
Ripple and the noise |
120mVp-p |
120mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
Dc voltage adjustable scope |
+10, -5% |
±10% |
±10% |
±10% |
±10% |
Start, rise, keep time |
800ms,50ms,10ms/115VAC 300ms,50ms,80ms/230VAC |
input |
Input voltage range |
85~264 VAC 47~63 Hz;120~370VDC |
Exchange input current |
2A/115 V 1A/ 230 V |
efficiency |
73% |
76% |
77% |
79% |
79% |
Impulse current |
冷启动电流30A/115VAC 60A/230VAC |
Leakage current |
<3.5 mA/240VAC |
Protection characteristics |
Overload protection |
115%~165% |
Protection way: current limiting, automatic recovery |
Over-voltage protection |
115%~135% |
Protection way: hiccups, auto recovery mode |
environment |
Working temperature, humidity |
-10℃~+60℃;20%~90 %RH |
Keep temperature, humidity |
-20℃~+85℃;10%~95 %RH |
Vibrate resistance |
10~500Hz,2G 10min./1 cycle time, 60 minutes, the axis |
security |
Compression sex |
3: KVAC between input and output and input and output KVAC: 1.5 to 0.5: KVAC |
Insulation resistance |
Between the input and output, the input and output, and ground: |
100M Ohms/500VDC |
standard |
Safety standards |
Accord with |
UL1012, UL1950,TUV EN60950 |
EMC standards |
Accord with |
EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
other |
weight |
0.51Kg |
packaging |
30pcs/15.8Kg/0.99CUFT |
note |
1. All the parameters in has not specified, all is in 230 VAC voltage input, rated load and 25 ℃ conditions measuring income value. |
2. Ripple and noise voltage is in 20 MHz bandwidth oscilloscope take 12 inches twisted pair end with 0.1 mu and 47 u when capacitance measurement. |
3. Tolerance is voltage setting error, the voltage adjustment rate and adjust the sum total of the current rate. |
4. The power to consider as a device installed in final equipment, this equipment must be to make sure it’s EMC index. |
5. Specific output current see output drop forehead curve |