Features:
High efficiency, high reliability and low cost
Switch input voltage range choice
Protection characteristics: short circuit/overload
Has the boot display (light emitting diode (led)
Air cooling
Working frequency 23 KHz
1 year warranty
Size: 129 * 98 * 38 mm (L * W * H)
Technical parameter:
model |
T-30A |
T-30B |
CH1 |
CH2 |
CH3 |
CH1 |
CH2 |
CH3 |
output |
Dc output voltage |
5V |
12V |
-5V |
5V |
12V |
-12V |
Output voltage tolerance |
±2% |
+2,-6% |
+2,-10% |
±2% |
+2,-6% |
±6% |
Rated output current |
3A |
1A |
0.5A |
3A |
1A |
0.5A |
Output current range |
0.5-3A |
0.1-1A |
0.1-0.5A |
0.5-3A |
0.1-1A |
0.1-0.5A |
Output power |
30W |
33W |
Ripple and the noise |
50mVp-p |
100mVp-p |
50mVp-p |
50mVp-p |
100mVp-p |
100mVp-p |
Dc voltage adjustable scope |
CH1: -5%,+10% |
Start, rise, keep time |
200ms,100ms,30ms Loaded with |
input |
Input voltage range |
85~132 VAC/170~264VAC 47~63 Hz;The switch choice |
240~370VDC |
Exchange input current |
0.8A/115 V 0.45A/ 230 V |
efficiency |
70% |
72% |
Impulse current |
Cold start current |
18A/115V 36A/230V |
Leakage current |
<0.75mA/240VAC |
protection |
Overload protection |
105%~150% |
characteristics |
Protection way: cut output, automatic recovery |
environment |
Working temperature, humidity |
-10℃~+60℃;20%~90 %RH |
Keep temperature, humidity |
-20℃~+85℃;10%~95 %RH |
Vibrate resistance |
10~500Hz,2G 10min.1 cycle time, 60 minutes, the axis |
security |
Compression sex |
Input/output: 1.5 KVAC input and between to KVAC output and the earth: 1.5: |
KVAC 输出与地:0.5KVAC |
Insulation resistance |
Between the input and output, the input and output, and ground: |
100M Ohms/500VDC |
Accord with standard |
Safety standards |
Accord with |
UL1012 |
EMC standard |
Design refer to FCC Part15 J Conduction Class A |
other |
weight |
0.42Kg |
packaging |
45pcs/19.4Kg/1.22CUFT |
note |
1. All the parameters in has not specified, all is in 230 VAC voltage input, rated load and 25 ℃ conditions measuring income value. |
2. Ripple and noise voltage is in 20 MHz bandwidth oscilloscope take 12 inches twisted pair end with 0.1 mu and 47 u when capacitance measurement. |
3. Tolerance is voltage setting error, the voltage adjustment rate and adjust the sum total of the current rate. |
4. Specific output current see output drop forehead curve. |
Installation dimensions:
|