Features:
The low price, high reliability
105 ℃ output capacitors
For AC power supply input global
Soft start current, effectively reduce the AC input impact
A short circuit protection and overload protection
Small volume, light weight
100% full load and machine test
EMI filters is installed inside, the ripple minimum
Technical parameter:
model |
T-100C |
T-100D |
CH1 |
CH2 |
CH3 |
CH1 |
CH2 |
CH3 |
Dc output voltage |
5V |
15V |
-15V |
5V |
12V |
24V |
Output voltage tolerance |
±2% |
±6% |
±6% |
±2% |
±6% |
±6% |
Rated output current |
10A |
2.5A |
1A |
6A |
2A |
2A |
Output current range |
2-12A |
0.2-2.5A |
0.1-1A |
2-10A |
0.1-2A |
0.2-2A |
Ripple and the noise |
80mVp-p |
150mVp-p |
150mVp-p |
80mVp-p |
150mVp-p |
150mVp-p |
Into line stability |
±0.5% |
±1% |
±1% |
±0.5% |
±1% |
±1% |
Load stability |
±1% |
±5% |
±5% |
±1% |
±5% |
±5% |
Dc power output |
100W |
102W |
efficiency |
77% |
79% |
Dc voltage adjustable scope |
CH1;+10,-5% |
CH1;+10,-5% |
Input voltage range |
85-132VAC/170-264VAC The switch choice |
47-63Hz;240-370VDC |
Input current |
2.5A/115V 1.25A/230V |
Impulse current |
冷启动电流 30A/115V 60A/230V |
Leakage current |
<0.5mA/240VAC |
Overload protection |
105%-150%M Type: current limiting reset: automatic recovery |
Overvoltage protection |
............ |
High temperature protection |
............ |
Temperature coefficient |
±0.03%/℃(0-50℃) ON+5V |
Start, rise, keep time |
200ms,50ms,16ms |
Vibrate resistance |
10-500Hz,2G 10min,/1 cycle time, 60 points, the axis |
Compression sex |
Input/output: 1.5 KvAC input and between shell: 1.5 KvAC output and the shell: 0.5 KvAC |
Isolating resistor |
Between the input and output, the input and output and the shell: shell, |
:500VDC/100MΩ |
Working temperature, humidity |
-10℃-+60℃(Reference output characteristics graph |
),20%-90%RH |
Storage temperature, humidity |
-20℃-+85℃,10%-95RH |
Shape dimension |
199×110×50mm |
weight |
0.83kgs |
Safety standards |
Meet the UL1012 requirements (not applied for mark) |
EMC mark |
Meet the FCC part 15 J condition grade B |
comments |
1. The above parameters test conditions for: 230 VAC, rated load, 25 ℃ and 70% Rh temperature. |
2. Tolerance: include setting tolerance, the line stability, load stability (note 5). |
3. Corrugated test: 20 MHz A12 "with" twisted-pair with 0.1, interrupt them through programs and 47 uF capacitance breaker. |
4. Into line voltage stability test: full load into line voltage to the lowest highest voltage. |
5. Load stability test: the load from 0% to 100%. |
Installation dimensions:
|