Language Options:
Catalog
Search
Enter your keyword
Contact Us
0086-13588988060 Hoffer Hu
0086-13356171655 Miki Gao
0086-577-62792655
cnjyins01@hotmail.com cnjyins02@hotmail.com cnjyins03@hotmail.com cnjyins@hotmail.com
■ Connection: 30cm wire
■ L, N: AC Input
■-V: DC output negative terminal
■ + V: DC output positive terminal
AC input voltage range |
170-264VAC 47-63HZ |
Input current |
1.2A/230V |
AC inrush current |
Cold-start current 60A/230V |
Leakage current |
<1mA/240VAC |
Over load protection |
105-150% hiccup mode,auto-recovery |
Water level |
IP68 |
Setup rise lold up time |
200ms 50ms 20ms |
Withstand voltage |
I/P-O/P:1.5KVAC 1minute |
Working temperature |
0-40℃@100%put |
Weight/packing |
type |
Output |
Error |
Range |
Efficiency |
LPV-100-12 |
12V,0-4.2A |
±1% |
100mV |
78% |
LPV-100-15 |
15V,0-2.1A |
±1% |
100mV |
78% |
LPV-100-24 |
24V,0-1.4A |
±1% |
100mV |
82% |
NOTE: 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a finalequipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. If the power supply is short-circuited under no load, it will recover automatically when short-circuit is removed. |